Sparco 3" competition harnesses are used by some of the most popular Formula One, Indy Car and Sports Car teams. Sparco lap belts feature an aircraft quality spring loaded quick release camlock system. This system ensures immediate evacuation in case of vehicle fire.
- FIA & SFI Homologated
- Available in both Pull-Up and Pull-Down configurations
- Black, Red or Blue
Note: The Pull-Up style is popular in limited space applications where pulling outwards on a belt is difficult. Pull-Down belts are pictured.
Sparco 3" competition harnesses are used by some of the most popular Formula One, Indy Car and Sports Car teams. Sparco lap belts feature an aircraft quality spring loaded quick release camlock system. This system ensures immediate evacuation in case of vehicle fire.
- FIA & SFI Homologated
- Available in both Pull-Up and Pull-Down configurations
- Black, Red or Blue
Note: The Pull-Up style is popular in limited space applications where pulling outwards on a belt is difficult. Pull-Down belts are pictured.
WARNING: It is strongly recommended that the shoulder harnesses are fitted as close to horizontal as possible. It is a must that the angle of the shoulder harness does not exceed 25 degrees in relation to the theoretical horizontal axis of the mounting points. It is recommended that the harnesses be mounted to the fixing points suggested by the car manufacturer. The fixing points should always be reinforced by a steel plate fitted on the outer side of the car, not by welding or pop riveting. After an accident or heavy crash, it is a must to replace the harnesses and carefully re-check their fixing points in the car. Should the belt show any wearing or cuts, it should be immediately replaced.
Manufacturer: SPARCO
SKU: 049001
