Sparco's 4-pt Camlock Tuning belt system features the same great spring loaded Camlock as with the competition harnesses, along with a secure 4-pt mounting system, 2-inch belts, and easy to install bolt-in ends. All hardware is included
Sparco's commitment to safety is proven through their reputation of builidng belts that exceed maximum safety requirements. Sparco harnesses offer the highest level of protection and safety giving drivers the confidence to race without any hesitations.
Sparco's 4-pt Camlock Tuning belt system features the same great spring loaded Camlock as with the competition harnesses, along with a secure 4-pt mounting system, 2-inch belts, and easy to install bolt-in ends. All hardware is included. Features:
Load spreading waist pad Spring-loaded Camlock buckle Available in Black, Blue, Red, or Silver WARNING: It is strongly recommended that the shoulder harnesses are fitted as close to horizontal as possible. It is a must that the angle of the shoulder harness does not exceed 25 degrees in relation to the theoretical horizontal axis of the mounting points. It is recommended that the harnesses be mounted to the fixing points suggested by the car manufacturer. The fixing points should always be reinforced by a steel plate fitted on the outer side of the car, not by welding or pop riveting. After an accident or heavy crash, it is a must to replace the harnesses and carefully re-check their fixing points in the car. Should the belt show any wearing or cuts, it should be immediately replaced. THESE BELTS ARE NOT DOT APPROVED FOR ROAD USE
Manufacturer: SPARCO
SKU: N/A
