SPARCO 75" SHOULDER HARNESS

Sparco 75" shoulder harnesses are ideal for use in vehicles with the horizontal cross bar fabricated near the rear of the vehicle. - FIA & SFI Homologated - Available in Black, Red, or Blue

Sparco 75" shoulder harnesses are ideal for use in vehicles with the horizontal cross bar fabricated near the rear of the vehicle. - FIA & SFI Homologated - Available in Black, Red, or Blue WARNING: It is strongly recommended that the shoulder harnesses are fitted as close to horizontal as possible. It is a must that the angle of the shoulder harness does not exceed 25 degrees in relation to the theoretical horizontal axis of the mounting points. It is recommended that the harnesses be mounted to the fixing points suggested by the car manufacturer. The fixing points should always be reinforced by a steel plate fitted on the outer side of the car, not by welding or pop riveting. After an accident or heavy crash, it is a must to replace the harnesses and carefully re-check their fixing points in the car. Should the belt show any wearing or cuts, it should be immediately replaced